Plywood Core with High-Pressure Plastic Laminate
Our Strongest Covered Wood Table!
TOPS: Table tops are constructed of solid, ¾” thick, AC grade, exterior glue plywood, surfaced with high pressure plastic laminate and backed with a phenolic sheet to prevent moisture penetration. Tops are edged with 3/16” thick, vinyl T-molding, secured with staples from the underside of the table top at regular intervals.
TOP SUPPORT STRUCTURE: Table tops are supported by a formed steel channel frame of 113/16” deep, 16 gauge steel. Frames are secured to the table top with screws placed no greater than 10” apart.
LEG ASSEMBLIES: Leg assemblies are wishbone style, constructed with one piece load bearing vertical members of 1.05” diameter, 14 gauge steel tubing. Each leg is capped with high impact plastic glides, secured with internal spring steel grippers. Tables less than 48” in length or diameter are furnished with independent folding legs of 1.05” diameter, 14 gauge steel tubing.
LEG BRACE MECHANISMS: Folding leg braces are constructed of 7/8” wide, 1/8” thick edge radiused steel. Coil-spring actuated, case hardened steel detents engage mating holes in the brace to secure the brace automatically when it is opened. Leg braces are attached to leg assemblies and pivot bracket by the use of steel shoulder rivets.
METAL FINISH: All metal parts are thoroughly cleaned and phosphatized to enhance paint adhesion. Metal parts are then finished with a thermofused epoxy powder coating.
Available standard in these sizes:
30″ x 60″
30″ x 72″ – In Stock Walnut/Brown
30″ x 96″ – In Stock Walnut/Brown
36″ x 72″
36″ x 96″
60″ diameter – In Stock Walnut/Brown
72 ” diameter
18″ x 60″
18″ x 72″
18″ x 96″
24″ x 60″
24″ x 72″
24″ x 96″
30″ x 30″
36″ x 36″
Custom Sizes also available.
#5000 Series Folding Tables
Minimum quantity 5.